Skip to content
Primary Menu

Education, Presentation, Publication

Funding & Recognition

Frostbite Prevention Using Autonomous Heated Glove Liners

Semester: Summer 2026


Presentation description

This project aims to prevent frostbite in individuals working in cold environments using autonomous heating devices. Modern heating devices are capable of heating users' hands but need intervention to turn on and off, requiring the user to know when they are in danger of frostbite. Frostbite is pervasive as numbness sets in before injury occurs, making it difficult and dangerous to cognitively identify. With 29% of frostbite victims suffering amputation and 70% suffering long-term loss of sensation, chronic pain, or hyperhidrosis, the use of autonomous heating devices can protect users without additional cognitive load. Our current glove liner design utilizes a temperature monitoring system and activates a heating element to increase the temperature of a user's hand. The automation process requires continuous monitoring of sensors, and the electrical heating requires large power draw during heating events. Therefore, the device is limited by the ability of the glove liners to conserve power and reduce heat loss to the outside environment. To improve heating efficiency, it is necessary to determine what kind of heating method performs best. We tested the effectiveness of our autonomous glove liners using nichrome, carbon fiber, and etched-foil nickel-alloy heating elements in a cold environment between -10 and -20 degrees Celsius. Initial results suggest that the nickel-alloy heating element encapsulated by polyimide shows the best heating results, however placement of this element is key to its success. Identifying the most efficient heating elements will allow the glove liners to autonomously monitor a user's hands for long periods of time while keeping them in a frostbite-free temperature range.
Presenter Name: Hunter Van Horn
Presentation Type: Poster
Presentation Format: In Person
Presentation #89
College: Engineering
School / Department: Electrical and Computer Engineering
Research Mentor: Jacob George
Additional Mentor: Jakob Travis
Time: 8:30 AM
Physical Location or Zoom link:

Ballroom